Rigol key generator. Creating an Arbitrary Waveform with the Rigol DG1022 Function/Arbitrary Waveform Generator

Rigol key generator Rating: 8,7/10 971 reviews

Waveform Generators

rigol key generator

It has been reported that the key generator does have problems with some browsers. Clearing your cache first and running it a few times seems to generate an acceptable code. The max hold trace is displayed in pink and the real time trace is displayed in yellow. This chapter introduces remote control as well as the control method. Additionally, the arbitrary waveform feature allows engineers to generate any desired waveform with UltraWave, our free waveform editing software. Each pulse train consists of a specified number of pulses with a userdefineable on- and off-time resulting in a pulse train dwell time.

Next

Riglol hack: unlock extra features on Rigol oscilloscopes (like DS1054Z)

rigol key generator

Delta One of the marker types. The enabled marker will appear on the trace selected through the Mkr Trace option and the readouts of this marker are also displayed in the active function area and at the upper right corner of the screen. Thanks a lot for your support and best regards, Mauro. The length should not exceed 48 characters. Demod Time Set the time for the analyzer to complete a signal demodulation after each sweep.

Next

Waveform Generators

rigol key generator

Keep it out of the reach of children. Freq Interp: set the Freq Interp to Log or Lin. Adjust Ref Level Large signal? When the function is enabled, the system changes to split-screen display. This function is usually used with channel switching. Auto Scale This function enables the readout resolution of the Y-axis to be the maximum possible while at the same time ensures the completeness of the signal. An internal operation needed more memory than that was available. At this point, the signal on the screen is zoomed out to gain more information about the signal.

Next

Rigol DSG815 RF Signal Generator !!Special Promotion!!

rigol key generator

The power consumption of the instrument cannot exceed 50 W. The amplitude setting controls the voltage difference between the 16,383 quantization level and the 0 quantization level. Peaks whose amplitudes are greater than the specified peak threshold are treated as real peaks. The highest order of harmonic available is 10 and the fundamental wave amplitude must be greater than -50 dBm; or else the measurement will be invalid. Table 2-65 Graticule Parameter Explanation Default Range 0 to 10 Unit Knob Step Direction Key Step 4. When the signal under measurement is small, turning on the preamplifier can reduce the displayed average noise level;. Defining the Amplitude and Period of the Waveform The mapping of quantization levels 0 to 16,383 to volts is defined using the amplitude and offset settings see Figure 6.

Next

Creating an Arbitrary Waveform with the Rigol DG1022 Function/Arbitrary Waveform Generator

rigol key generator

Actual signals can also be captured through an oscilloscope, then downloaded to a signal generator for output. Any other languages are disabled except English. System Message View the system messages recently displayed up to 71 items. Product End-of-Life Handling The equipment may contain substances that could be harmful to the environment or human health. The first waveform was a ramp waveform shown in Figure 3 that climbs linearly from 0 to 16,380 over 4,096 samples. The Rigol Technologies is the place to find great deals on Demo, Used and Refurbished products.

Next

Creating an Arbitrary Waveform with the Rigol DG1022 Function/Arbitrary Waveform Generator

rigol key generator

Direct Execution Press the key to execute the corresponding function. Noise Mkr Execute the Noise marker function for the selected marker and read the noise power spectral density. This line can be used as either the reference for you to read the measurement result or the threshold condition for the peaks displayed in the peak table. The second waveform demonstrates a more complicated shape. To Acquire the License Please order the desired option and the option key is provided.

Next

Riglol hack: unlock extra features on Rigol oscilloscopes (like DS1054Z)

rigol key generator

Parameter Input When selected, use the numeric keys to modify the parameters directly. MaxHold Rst Delete the original signal and capture new signals for the max hold trace reset. The function is invalid in Zero Span mode. The two most-significant bits are zeros. Single In single mode, the analyzer stops after the specified number of tests. It is used to measure the delta values of X Frequency or Time and Y Amplitude between the reference point and a certain point on the trace. Wherein, the result of peak search is marked with the delta marker and the result of minimum search is marked with the reference marker.

Next

Rigol DSG815 RF Signal Generator !!Special Promotion!!

rigol key generator

Following the start-up screen which shows the start-up initialization process information, the sweep curve is displayed. As mentioned in the other thread: no guesswork required, Rigol does indeed include all options for free. The format of domain server address is nnn. This option already includes the option for the pulse modulation feature. For example, if the amplitude is set to 5 V and the offset is set to 0 V, then the 0 quantization level will output -2.

Next